Translations:Manuals:MBPlusFblV52:Setupmenu J/5/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "=Einstellung über StudioXm= Damit man sieht, welches Servo wo angesteckt ist, werden die Servos in der gegebenen Reihenfolge CH1 bis CH3 (bzw. CH7) nacheinander kurz auf- und..." |
(No difference)
|
Revision as of 08:25, 22 April 2021
Einstellung über StudioXm
Damit man sieht, welches Servo wo angesteckt ist, werden die Servos in der gegebenen Reihenfolge CH1 bis CH3 (bzw. CH7) nacheinander kurz auf- und abfahren, sobald das Einstellmenü für die Servotrimmungen geöffnet wird. Stecke die Servohörner in 0 Position möglichst so auf, dass die Anlenkgestänge einen 90 Gradwinkel zum Servohorn bilden und trimme die Servos falls nötig entprechend über die + und - Schaltflächen nach. Passe dann noch wie oben beschrieben die Anlenkgestänge an.
File:SetupHm.PNG