Difference between revisions of "Translations:Manuals:MBPlusFblV52:Governormenu C/2/de"

From BEASTX Wiki
Jump to navigation Jump to search
(Created page with "Bei Einstellpunkt '''C''' wird die maximale Gasposition festgelegt. Im Modus "Verbrenner" wird der Ausgang [CH5] direkt vom Motorkanal/Gassteuerknüppel angesteuert. Im Modus...")
 
(No difference)

Latest revision as of 07:39, 28 April 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:Governormenu C)
At menu point '''C''' you have to set full throttle position of your ESC or throttle servo. Here the output [CH5] can be only controlled by the throttle stick when the RPM Governor type is set to „nitro“. In „electric“ mode the throttle output will stay locked. So you can set the full throttle position quite comfortable without the motor running high (we expect that your maximum stick position actually indicates the maximum throttle position of your ESC in case your ESC is setup correctly!). Otherwise there are no differences between the modes „electric“ and „nitro“.<br />
<br />
TranslationBei Einstellpunkt '''C''' wird die maximale Gasposition festgelegt. Im Modus "Verbrenner" wird der Ausgang [CH5] direkt vom Motorkanal/Gassteuerknüppel angesteuert. Im Modus "Elektro" ist der Ausgang gesperrt und wird auf der niedrigsten Position gehalten. So kann die Vollgasposition gesetzt werden, ohne dass der Motor mit hoher Drehzahl läuft. Ansonsten gibt es an diesem Einstellpunkt keine Unterschiede zwischen Elektro- und Verbrennerheli!<br />
<br />

Bei Einstellpunkt C wird die maximale Gasposition festgelegt. Im Modus "Verbrenner" wird der Ausgang [CH5] direkt vom Motorkanal/Gassteuerknüppel angesteuert. Im Modus "Elektro" ist der Ausgang gesperrt und wird auf der niedrigsten Position gehalten. So kann die Vollgasposition gesetzt werden, ohne dass der Motor mit hoher Drehzahl läuft. Ansonsten gibt es an diesem Einstellpunkt keine Unterschiede zwischen Elektro- und Verbrennerheli!