Difference between revisions of "Translations:MICROBEAST PLUS RPM Governor - How to setup a Castle Creations ESC/2/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
(Importing a new version from external source)
 
Line 1: Line 1:
−
The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of the device using the Expert Parameters section in the StudioX Software ([[#Using Firmware Version 4.2.x or higher and "External Governor" mode|see section below for further details]]). '''Otherwise, do not use this mode. By default MICROBEAST PLUS / AR7210BX will do all the motor control logic including initial soft start on its own!''' For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:
+
The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of MICROBEAST PLUS using the Expert Parameters section in the StudioX Software ([[#Using Firmware Version 4.2.x or higher and "External Governor" mode|see section below for further details]]). '''By default MICROBEAST PLUS / AR7210BX will do all the motor control logic, including initial soft start!''' For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:

Latest revision as of 15:46, 30 March 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (MICROBEAST PLUS RPM Governor - How to setup a Castle Creations ESC)
The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of MICROBEAST PLUS using the Expert Parameters section in the StudioX Software ([[#Using Firmware Version 4.2.x or higher and "External Governor" mode|see section below for further details]]). '''By default MICROBEAST PLUS / AR7210BX will do all the motor control logic, including initial soft start!''' For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:
TranslationThe Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of MICROBEAST PLUS using the Expert Parameters section in the StudioX Software ([[#Using Firmware Version 4.2.x or higher and "External Governor" mode|see section below for further details]]). '''By default MICROBEAST PLUS / AR7210BX will do all the motor control logic, including initial soft start!''' For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:

The Castle Creations ESC offer a special "External Governor" mode to be used with flybarless systems. This mode has an integrated soft start and autorotation bailout function. If your MICROBEAST PLUS/AR7210BX is updated to firmware version 4.2.x or higher you can use this mode, but it is required to disable the soft start feature of MICROBEAST PLUS using the Expert Parameters section in the StudioX Software (see section below for further details). By default MICROBEAST PLUS / AR7210BX will do all the motor control logic, including initial soft start! For this you have to setup the Castle ESC to a very simple throttle control mode which is offered by using the fixed wing "Airplane" mode as "Vehicle type" in combination with a very fast throttle response:

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:MICROBEAST_PLUS_RPM_Governor_-_How_to_setup_a_Castle_Creations_ESC/2/en&oldid=19334"