Difference between revisions of "Translations:Manuals:MBPlusFblV52:Receiver B/3/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 20:11, 8 April 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:Receiver B)
=Adjustment on the device=
If not already done enter RECEIVER MENU and scan your receiver at Menu Point A. Then setup will skip to Menu Point '''B'''.<br />
<br />
{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />
<br />
Translation=Adjustment on the device=
If not already done enter RECEIVER MENU and scan your receiver at Menu Point A. Then setup will skip to Menu Point '''B'''.<br />
<br />
{{QUOTE|If the Status-LED lights in '''red color''' this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.}}<br />
<br />

Adjustment on the device

If not already done enter RECEIVER MENU and scan your receiver at Menu Point A. Then setup will skip to Menu Point B.

If the Status-LED lights in red color this means either there is no valid remote control signal available or that you did try to assign two or more channels to a function. So check if the receiver is connected and powered properly and that you're only moving one channel at a time when trying to do the manual function assignment.