Difference between revisions of "Translations:Manuals:AR7210FblV5:Governormenu F/7/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 23:10, 30 July 2022

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:AR7210FblV5:Governormenu F)
=Adjustment on the device=
To set the gear ratio on the device you have to adjust three menu points in a row. Menu point '''F''' sets the number of gear ratio before the decimal point, menu points '''G''' and '''H''' specify the first two decimal places. Compare the following table and set the Status-LED using the rudder stick to the corresponding color and condition at each menu point so the desired gear ratio will result as a combination of all three menu points ('''X.YZ:1'''). The ratio can be adjusted in increments of 0.05. Choose the ratio that is the closest for your helicopter and set the menu points one after the other. To proceed to the each menu point briefly push the button. After menu point '''H''' the initial setup is finished and the button press will lead back to operation mode.<br />
<br />
Translation=Adjustment on the device=
To set the gear ratio on the device you have to adjust three menu points in a row. Menu point '''F''' sets the number of gear ratio before the decimal point, menu points '''G''' and '''H''' specify the first two decimal places. Compare the following table and set the Status-LED using the rudder stick to the corresponding color and condition at each menu point so the desired gear ratio will result as a combination of all three menu points ('''X.YZ:1'''). The ratio can be adjusted in increments of 0.05. Choose the ratio that is the closest for your helicopter and set the menu points one after the other. To proceed to the each menu point briefly push the button. After menu point '''H''' the initial setup is finished and the button press will lead back to operation mode.<br />
<br />

Adjustment on the device

To set the gear ratio on the device you have to adjust three menu points in a row. Menu point F sets the number of gear ratio before the decimal point, menu points G and H specify the first two decimal places. Compare the following table and set the Status-LED using the rudder stick to the corresponding color and condition at each menu point so the desired gear ratio will result as a combination of all three menu points (X.YZ:1). The ratio can be adjusted in increments of 0.05. Choose the ratio that is the closest for your helicopter and set the menu points one after the other. To proceed to the each menu point briefly push the button. After menu point H the initial setup is finished and the button press will lead back to operation mode.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:AR7210FblV5:Governormenu_F/7/en&oldid=19964"