7,309
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: +
Translations:Help:StudioX:Bootloader/1/en (view source)
Revision as of 07:49, 7 December 2022
, 1 year agoImporting a new version from external source
{{DISPLAYTITLE:Bootloader mode|noerror}}
In case the firmware update does not start to run in StudioX, please try to flash your device from bootloader mode. To enter boot mode you need a jumper wire or modified Spektrum bind plug with two ports next to each other. Then you need a battery or BEC supply to power the Beastx unit. See attached pictures (in the example we use a SPEKTRUM AR7210BX but this applies to any BEASTX device accordingly).<br />
In case the firmware update does not start to run in StudioX, please try to flash your device from bootloader mode. To enter boot mode you need a jumper wire or modified Spektrum bind plug with two ports next to each other. Then you need a battery or BEC supply to power the Beastx unit. See attached pictures (in the example we use a SPEKTRUM AR7210BX but this applies to any BEASTX device accordingly).<br />
<br />
<br />