Translations:Manuals:MBUltraFblV5:Setupmenu B/5/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
 
(No difference)

Latest revision as of 11:51, 28 February 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBUltraFblV5:Setupmenu B)
=Adjustment on the device=
To select the desired servo frequency move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''B''':<br />
<br />
{{TABLEV5|Swashplate servo frequency|50 Hz|65 Hz|120 Hz|165 Hz|200 Hz}}<br />
'''Note:''' When you set a different frequency using the StudioX App the Status LED will be '''off'''. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />

Adjustment on the device

To select the desired servo frequency move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point B:

Status-LED Swashplate servo frequency
purple 50 Hz
red flashing 65 Hz
red 120 Hz
blue flashing 165 Hz
blue 200 Hz


Note: When you set a different frequency using the StudioX App the Status LED will be off. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:Setupmenu_B/5/en&oldid=20568"