Translations:Manuals:MBUltraFblV5:TelemetryInfo/5/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
Newer edit →
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
(No difference)

Revision as of 09:01, 23 March 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBUltraFblV5:TelemetryInfo)
= GRAUPNER HOTT =
Make sure you receiver is set up to send telemetry data on the external telemetry data output. Usually this is done from the TELEMETRY MENU of your HOTT radio.<br />
<br />
The telemetry data line is connected to [SYS] port of MICROBEAST ULTRA. For this type of application you must set RECEIVER MENU point '''L''' to Status LED blue (="HOTT").<br />
See [[Manuals:MBUltraFblV5:Receiver_M/en|section "Telemetry" in RECEIVER MENU]] for additional information.<br /> 
<br />
To get telemetry information on your radio's display, there is not much to do. Just make sure to switch on the radio and receiver simultaneously. If you open the TELEMETRY tab on the radio you should see the "SEARCH" label, indicating that telemetry data received by the radio. After apprx. 15 seconds, the radio should display telemetry data. MICROBEAST ULTRA is simulating a HOTT EAM (Electric Air Module) and VARIO. So you will see the associated screens on the radio.<br />
<br />
{| cellspacing="20"
|- style="text-align: center;"

GRAUPNER HOTT


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBUltraFblV5:TelemetryInfo/5/en&oldid=21884"