(3 intermediate revisions by the same user not shown)
Line 1:
Line 1:
=Adjustment on the device=
=Adjustment on the device=
After receiver scan and function assignment the Menu Point '''M''' will open, in case you're using a Spektrum® SRXL2 or JETI® EXBUS radio system. If needed you can directly get to this screen without changing your basic radio setup by clicking the button "Telemetry" in overview screen of RECEIVER MENU.<br />
In case you're using a receiver with telemetry capability, you can change the telemetry parameters at menu points '''L''' and '''M'''. If needed, you can directly skip to these parameters without scanning receiver type and assigning functions at RECEIVER MENU points '''A''' and '''B''' by pushing and holding the button for at least 2 seconds at menu points '''A''' or '''B'''.<br />
<br />
To select the connected ESC/telemetry data source move the rudder stick repeatedly in one direction until the Status LED lights in the correct color:<br />
<br />
{|- cellpadding="4" cellspacing="0" border="1"
|- style="width:100px; text-align:left;"
! Status-LED !! Telemetry data source
|-
|style="color:white; background-color:#000000" | off
|style="color:white; background: linear-gradient(to right, #FF3300, black, #FF3300)" | red flashing
| Kontronik® JIVE/PowerJIVE/HeliJIVE
|-
|style="color:white; background-color:#FF3300" | red
| Kontronik® JIVE Pro/Kosmik
|-
|style="color:white; background-color:#0066FF" | blue
| Scorpion® Tribunus ("UnSc" mode)
|}<br />
<br />
<br />
Latest revision as of 07:42, 18 August 2023
Adjustment on the device
In case you're using a receiver with telemetry capability, you can change the telemetry parameters at menu points L and M. If needed, you can directly skip to these parameters without scanning receiver type and assigning functions at RECEIVER MENU points A and B by pushing and holding the button for at least 2 seconds at menu points A or B.