Difference between revisions of "Translations:Manuals:MBPlusFblV52:TailMotor/7/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 13:36, 31 October 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV52:TailMotor)
'''Setup by using the device menu'''
As usual, you can setup nearly everything also without StudioX. At Setupmenu item '''E''' you can check the control directions of the remote control: red indicates left, blue indicates right. If colors are swapped, reverse stick direction on the radio. Switch on the main motor on the radio, then you can set the hover throtle position at menupoint '''E'''. To adjust the throttle tap the tail stick left/right. (ATTENTION!! Rear motor can rotate!)<br />
<br />
At Setupmenu item '''F''' you can use the stick left/right to set the "Motor off" position while the main motor switch on the radio is off. If you switch on the main motor, you can adjust the idle position by tail stick input.<br />
<br />
Translation'''Setup by using the device menu'''
As usual, you can setup nearly everything also without StudioX. At Setupmenu item '''E''' you can check the control directions of the remote control: red indicates left, blue indicates right. If colors are swapped, reverse stick direction on the radio. Switch on the main motor on the radio, then you can set the hover throtle position at menupoint '''E'''. To adjust the throttle tap the tail stick left/right. (ATTENTION!! Rear motor can rotate!)<br />
<br />
At Setupmenu item '''F''' you can use the stick left/right to set the "Motor off" position while the main motor switch on the radio is off. If you switch on the main motor, you can adjust the idle position by tail stick input.<br />
<br />

Setup by using the device menu As usual, you can setup nearly everything also without StudioX. At Setupmenu item E you can check the control directions of the remote control: red indicates left, blue indicates right. If colors are swapped, reverse stick direction on the radio. Switch on the main motor on the radio, then you can set the hover throtle position at menupoint E. To adjust the throttle tap the tail stick left/right. (ATTENTION!! Rear motor can rotate!)

At Setupmenu item F you can use the stick left/right to set the "Motor off" position while the main motor switch on the radio is off. If you switch on the main motor, you can adjust the idle position by tail stick input.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV52:TailMotor/7/en&oldid=22325"