Latest revision as of 14:27, 9 April 2024
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Radio Setup:SRXL2 )
==Connecting to DI2 port== To connect a receiver with standard servo connectors, i.e. the '''AR6610T''' or '''AR8020T''' you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - order nr. BXA76403. Voltage is the first pin from the left, signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br /> <br /> {|cellspacing="50" style="text-align:center;" |[[Image:SRXL2 AR6610T en.png| x150px]] |- style="text-align:center; font-size:75%;" | SRXL2 receiver with standard servo connector and adapter |} <br />
==Connecting to DI2 port==
To connect a receiver with standard servo connectors, i.e. the '''AR6610T''' or '''AR8020T''' you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - order nr. BXA76403. Voltage is the first pin from the left, signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br />
<br />
{|cellspacing="50" style="text-align:center;"
|[[Image:SRXL2 AR6610T en.png| x150px]]
|- style="text-align:center; font-size:75%;"
| SRXL2 receiver with standard servo connector and adapter
|}
<br />
Translation ==Connecting to DI2 port== To connect a receiver with standard servo connectors, i.e. the '''AR6610T''' or '''AR8020T''' you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - order nr. BXA76403. Voltage is the first pin from the left, signal is connected at the third pin from the left. Minus is the second pin from the front/right.<br /> <br /> {|cellspacing="50" style="text-align:center;" |[[Image:SRXL2 AR6610T en.png| x150px]] |- style="text-align:center; font-size:75%;" | SRXL2 receiver with standard servo connector and adapter |} <br /> Connecting to DI2 port
To connect a receiver with standard servo connectors, i.e. the AR6610T or AR8020T you need an adapter from servo plug to JST-ZH type. We offer a special adapter if needed - order nr. BXA76403. Voltage is the first pin from the left, signal is connected at the third pin from the left. Minus is the second pin from the front/right.
SRXL2 receiver with standard servo connector and adapter