Difference between revisions of "Translations:Manuals:BXFbl:Receiver N/3/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 06:58, 18 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Receiver N)
=Setup with StudioX=
To teach the failsafe position choose "Proceed" when asked to teach the failsafe position and set the throttle channel on your remote control to the desired position. Then press '''Set''' to save the position. If you did not connect the throttle output and don't need throttle failsafe, press '''Cancel''' to complete setup!<br />
<br />
Translation=Setup with StudioX=
To teach the failsafe position choose "Proceed" when asked to teach the failsafe position and set the throttle channel on your remote control to the desired position. Then press '''Set''' to save the position. If you did not connect the throttle output and don't need throttle failsafe, press '''Cancel''' to complete setup!<br />
<br />

Setup with StudioX

To teach the failsafe position choose "Proceed" when asked to teach the failsafe position and set the throttle channel on your remote control to the desired position. Then press Set to save the position. If you did not connect the throttle output and don't need throttle failsafe, press Cancel to complete setup!

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Receiver_N/3/en&oldid=22995"