Difference between revisions of "Translations:Manuals:BXFbl:Setupmenu overview/10/de"

From BEASTX Wiki
Jump to navigation Jump to search
(Created page with "= C - Heck Pulsweite = Tap rudder stick to select pulse width (change LED color). Most servos run at 1520µs (or 1500µs which is nearly the same!). Special gyro servos use 76...")
 
(No difference)

Latest revision as of 11:51, 19 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu overview)
= C - Rudder pulse width =
Tap rudder stick to select pulse width (change LED color). Most servos run at 1520µs (or 1500µs which is nearly the same!). Special gyro servos use 760µs pulse. Usually this will be printed on the servo.<br />
<br />
Translation= C - Heck Pulsweite =
Tap rudder stick to select pulse width (change LED color). Most servos run at 1520µs (or 1500µs which is nearly the same!). Special gyro servos use 760µs pulse. Usually this will be printed on the servo.<br />
<br />

C - Heck Pulsweite

Tap rudder stick to select pulse width (change LED color). Most servos run at 1520µs (or 1500µs which is nearly the same!). Special gyro servos use 760µs pulse. Usually this will be printed on the servo.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Setupmenu_overview/10/de&oldid=23159"