Difference between revisions of "Translations:Manuals:BXFbl:Setupmenu overview/17/de"
Jump to navigation
Jump to search
Shornstein (talk | contribs) (Created page with "= J - Servomitten = Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should fo...") |
(No difference)
|
Latest revision as of 11:52, 19 April 2024
J - Servomitten
Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should form a 90 degrees angle to the linkages. The swashplate must be perfectly level. Repeat this for all servos.
Note: When the Status LED is off, all servos are in their true center position (1520µs pulse width).