Difference between revisions of "Translations:Manuals:BXFbl:Setupmenu D/3/en"

From BEASTX Wiki
Jump to navigation Jump to search
(Importing a new version from external source)
 
(No difference)

Latest revision as of 09:41, 29 April 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu D)
=Adjustment on the device=
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br />
<br />
{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}
<br />
'''Note:''' When you set a different frequency using the StudioX App the Status LED will be '''off'''. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />
Translation=Adjustment on the device=
To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point '''D'''. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.<br />
<br />
{{TABLEV5|Rudder servo frequency |50 Hz|165 Hz|270 Hz|333 Hz|560 Hz}}
<br />
'''Note:''' When you set a different frequency using the StudioX App the Status LED will be '''off'''. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!<br />
<br />
<br />

Adjustment on the device

To select the desired servo frequency, move the rudder stick repeatedly in one direction until the Status-LED lights in the correct color at SETUP MENU point D. Please note that depending on the rudder servo pulse width chosen at Menu Point C, you may not be able to select 560Hz! Servos with Standard pulse width of 1500/1520µs can only run at maximum frame rate of 400Hz.

Status-LED Rudder servo frequency
purple 50 Hz
red flashing 165 Hz
red 270 Hz
blue flashing 333 Hz
blue 560 Hz


Note: When you set a different frequency using the StudioX App the Status LED will be off. You can switch back to a preset setting by tapping the rudder stick as described, but this will remove your custom setting!


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Setupmenu_D/3/en&oldid=23480"