Difference between revisions of "Translations:Manuals:BXFbl:Radio Setup:RemoteSat/24/en"
Jump to navigation
Jump to search
(Importing a new version from external source) |
(No difference)
|
Revision as of 14:16, 14 May 2024
MICROBEAST PLUS / NANOBEAST
- Insert a Spektrum® Bind Plug at the [SYS] port.
- To bind a DSMX satellite switch on the power supply now. The yellow LED H on the MICROBEAST PLUS will start to flash immediately. The receiver's yellow LED will start to flash as well. Now you can bind the transmitter as usual (for more information refer to the instructions of your radio control system).
- After successful binding procedure the receiver‘s LED will stay solid. On the MICROBEAST PLUS LED H will flash alternating with all other LEDs for 2 seconds, then the device will restart. Remove the bind plug. If needed cycle power and enter RECEIVER MENU as further setup steps may be required to use this type of receiver (see above).