Translations:Manuals:BXFbl:Setupmenu B/10/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older edit
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
 
Line 2: Line 2:
* With electronic swashplate mixing the two aileron servos have to be connected to [CH2] (=left) and [CH3] (=right).
* With electronic swashplate mixing the two aileron servos have to be connected to [CH2] (=left) and [CH3] (=right).
* With a mechanical mixed head (H1-mixing) the aileron servo connects to [CH2] and the collective pitch servo to [CH3].
* With a mechanical mixed head (H1-mixing) the aileron servo connects to [CH2] and the collective pitch servo to [CH3].
* When using a scale helicopter with 90 degrees eCCPM, you can connect a second elevator servo to [CH6] output on the MICROBEAST PLUS / ULTRA. Note that [CH6] is only a signal output, so you must power the servo from elsewhere, i.e. by getting power from the [SYS]-port using a Y-adapter (for + and - only!). Anyhow, with large scale helicopters we recommend to use a separate power distribution unit to which you connect the servos. This will be the better option in regards to robust and fail safe power distribution.<br />
<br />
<br />
<br />

Latest revision as of 18:56, 30 May 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu B)
* The elevator servo is always plugged into [CH1] port.
* With electronic swashplate mixing the two aileron servos have to be connected to [CH2] (=left) and [CH3] (=right).
* With a mechanical mixed head (H1-mixing) the aileron servo connects to [CH2] and the collective pitch servo to [CH3].
<br />
  • The elevator servo is always plugged into [CH1] port.
  • With electronic swashplate mixing the two aileron servos have to be connected to [CH2] (=left) and [CH3] (=right).
  • With a mechanical mixed head (H1-mixing) the aileron servo connects to [CH2] and the collective pitch servo to [CH3].


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Setupmenu_B/10/en&oldid=23788"