Latest revision as of 13:38, 5 June 2024
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu E TM )
When using a helicopter with tail motor instead of a rudder servo, we must set the start, idle and hover position for the motor in the next steps. Additionaly we have to make sure the rudder stick on the radio is set correctly. Please note that the tail motor control is connected to the main throttle. The tail motor will start automatically when the throttle is raised above 20%. When the throttle is cut, the tail motor will also be stopped after a little delay to make the landing procedure as smooth as possible.<br />
When using a helicopter with tail motor instead of a rudder servo, we must set the start, idle and hover position for the motor in the next steps. Additionaly we have to make sure the rudder stick on the radio is set correctly. Please note that the tail motor control is connected to the main throttle. The tail motor will start automatically when the throttle is raised above 20%. When the throttle is cut, the tail motor will also be stopped after a little delay to make the landing procedure as smooth as possible.<br />
<br />
{|
|-
| style="padding-left: 40px;" |[[File:Tailmotor_s.png|x150px|none]]
|}
<br /> Translation When using a helicopter with tail motor instead of a rudder servo, we must set the start, idle and hover position for the motor in the next steps. Additionaly we have to make sure the rudder stick on the radio is set correctly. Please note that the tail motor control is connected to the main throttle. The tail motor will start automatically when the throttle is raised above 20%. When the throttle is cut, the tail motor will also be stopped after a little delay to make the landing procedure as smooth as possible.<br /> When using a helicopter with tail motor instead of a rudder servo, we must set the start, idle and hover position for the motor in the next steps. Additionaly we have to make sure the rudder stick on the radio is set correctly. Please note that the tail motor control is connected to the main throttle. The tail motor will start automatically when the throttle is raised above 20%. When the throttle is cut, the tail motor will also be stopped after a little delay to make the landing procedure as smooth as possible.
