Translations:Help:FAQ:Powerup/4/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
 
(No difference)

Latest revision as of 09:38, 12 June 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:Powerup)
==Status LED is flashing RED/BLUE after finishing init sequence==
When Microbeast is flashing red-blue after start up, the throttle channel is in wrong position. For safety reason the throttle will be locked until throttle is moved to stop position on the radio. If throttle is in stop position already, check and set throttle lock position (=Failsafe position) at RECEIVER MENU point '''N'''.<br />
<br />
Note that you can disable throttle locking mechanism if needed, i.e. for programming your ESC. This can be done at SETUP MENU point '''N''' (=Governor mode).<br />
<br />
<br />

Status LED is flashing RED/BLUE after finishing init sequence

When Microbeast is flashing red-blue after start up, the throttle channel is in wrong position. For safety reason the throttle will be locked until throttle is moved to stop position on the radio. If throttle is in stop position already, check and set throttle lock position (=Failsafe position) at RECEIVER MENU point N.

Note that you can disable throttle locking mechanism if needed, i.e. for programming your ESC. This can be done at SETUP MENU point N (=Governor mode).


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:Powerup/4/en&oldid=24247"