Translations:Manuals:BXFbl:Setupmenu G/11/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
8,042 edits
Importing a new version from external source
 
(No difference)

Latest revision as of 12:00, 18 June 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu G)
==Additional swashplate servo for scale helicopters==
When using a scale helicopter with 90 degrees eCCPM, you can connect a second elevator servo to [CH7] output on the MICROBEAST PLUS. On MICROBEAST ULTRA the second elevator servo connects to [CH6]. Please note that the second elevator servo port will require a power cycle to enable after you've set up 90 degrees eCCPM mode. You can also change the ratio for the servo at [CH6] / [CH7] in StudioX to activate the additional servo output. When the ratio for [CH6] / [CH7] is 0 on the other hand, the servo outputs will be controlled from the AUX channel that can be set in RECEIVER MENU.<br />
<br />
<br />

Additional swashplate servo for scale helicopters

When using a scale helicopter with 90 degrees eCCPM, you can connect a second elevator servo to [CH7] output on the MICROBEAST PLUS. On MICROBEAST ULTRA the second elevator servo connects to [CH6]. Please note that the second elevator servo port will require a power cycle to enable after you've set up 90 degrees eCCPM mode. You can also change the ratio for the servo at [CH6] / [CH7] in StudioX to activate the additional servo output. When the ratio for [CH6] / [CH7] is 0 on the other hand, the servo outputs will be controlled from the AUX channel that can be set in RECEIVER MENU.


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:BXFbl:Setupmenu_G/11/en&oldid=24585"