Translations:Manuals:BXFbl:Receiver M/20/en: Difference between revisions
Jump to navigation
Jump to search
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
==OMP 65A ESC== | ==OMP 65A ESC== | ||
Connect the control wire of your OMP ESC to port [IO1]. Connect the pin labeled with "TX" from the ESC to the port [IO2] using a single servo wire with plugs on both sides. Optionaly you can connect the yellow wire for measuring the motor speed to the [RPM] input at MICROBEAST ULTRA, so that it is out of the way. For telemetry transmission it is not needed as the data will be included in the telemetry signal!<br /> | Connect the control wire of your OMP ESC to port [IO1] / [DI1]. Connect the pin labeled with "TX" from the ESC to the port [CH5] / [IO2] using a single servo wire with plugs on both sides. Optionaly you can connect the yellow wire for measuring the motor speed to the [RPM] input at MICROBEAST PLUS / ULTRA, so that it is out of the way. For telemetry transmission it is not needed as the data will be included in the telemetry signal!<br /> | ||
<br /> | <br /> | ||
Latest revision as of 11:58, 5 July 2024
OMP 65A ESC
Connect the control wire of your OMP ESC to port [IO1] / [DI1]. Connect the pin labeled with "TX" from the ESC to the port [CH5] / [IO2] using a single servo wire with plugs on both sides. Optionaly you can connect the yellow wire for measuring the motor speed to the [RPM] input at MICROBEAST PLUS / ULTRA, so that it is out of the way. For telemetry transmission it is not needed as the data will be included in the telemetry signal!