Translations:Manuals:BXFbl:Governormenu B/5/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "== Verbrennerheli == With a nitro/gasser model bring the throttle stick to idle position or a slightly increased idle position (not „motor off“!) so MICROBEAST PLUS/ULTRA can determine the effective throttle range in the next step. In case you've not assigned an auxiliary channel to control the Governor when doing the setup in RECEIVER MENU, this position additionaly will be used as idle position when performing autorotation maneuvers. So you should set the throttle..." |
(No difference)
|
Revision as of 14:30, 26 March 2025
Verbrennerheli
With a nitro/gasser model bring the throttle stick to idle position or a slightly increased idle position (not „motor off“!) so MICROBEAST PLUS/ULTRA can determine the effective throttle range in the next step. In case you've not assigned an auxiliary channel to control the Governor when doing the setup in RECEIVER MENU, this position additionaly will be used as idle position when performing autorotation maneuvers. So you should set the throttle as high as necessary here that the motor will maintain a stable run and doesn‘t quit in autorotation.
Watch Out! Output [CH5] can be directly controlled by the throttle stick.
