Translations:Manuals:BXFbl:Setupmenu E TM/15/en

2. Now raise the throttle of the main motor above 10%. The tail motor will start to turn with raised throttle as well. This is the minimum throttle that will not be exceeded when the main motor is running. You can increase/decrease the throttle by tapping the rudder stick left/right or by adjusting the corresponding value in the StudioX app. The motor should run at a steady rpm. Not too high, otherwise turning the heli to the left may be restricted. But also not too low, as switching off the tail motor completely will cause bad gyro behavior in flight!