Servos for flybarless usage: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
<translate> | <translate> | ||
<!--T:1--> | <!--T:1--> | ||
| Line 8: | Line 7: | ||
<!--T:2--> | <!--T:2--> | ||
Servo torque in kg/cm should be at least 2-3 times the heli weight in | Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice. | ||
<!--T:3--> | <!--T:3--> | ||