Difference between revisions of "Translations:Manuals:MB Plus:Receiver setup menu B/1/de"

From BEASTX Wiki
Jump to navigation Jump to search
(Created page with "{{TOC_MBPlus/de}} If not a standard receiver but a single-line receiver was selected at menu point '''A''', it must be established wh...")
(No difference)

Revision as of 09:50, 28 May 2015

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MB Plus:Receiver setup menu B)
{{TOC_MBPlus}}
{{DISPLAYTITLE:Receiver setup menu point B and following|noerror}}
<p>
If not a standard receiver but a single-line receiver was selected at [[Manuals:MB_Plus:Receiver_setup_menu_A|menu point '''A''']], it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.</p>
Translation{{TOC_MBPlus/de}}
If not a standard receiver but a single-line receiver was selected at [[Manuals:MB_Plus:Receiver_setup_menu_A|menu point '''A''']], it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.<br />
<br />

If not a standard receiver but a single-line receiver was selected at menu point A, it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.