Manuals:MB Plus:Setupmenu M/en: Difference between revisions
Jump to navigation
Jump to search
Importing a new version from external source |
Importing a new version from external source |
||
| Line 19: | Line 19: | ||
'''Note:''' The sensor direction colors may differ between different BEASTX devices and different MICROBEAST/MICROBEAST PLUS firmware versions. Therefore the Status-LED colors should be used as reference for one device with one specific firmware version only. We highly recommend not to rely on the Status-LED color when transfering setups from one device to another. Always check sensor directions manually!<br /> | '''Note:''' The sensor direction colors may differ between different BEASTX devices and different MICROBEAST/MICROBEAST PLUS firmware versions. Therefore the Status-LED colors should be used as reference for one device with one specific firmware version only. We highly recommend not to rely on the Status-LED color when transfering setups from one device to another. Always check sensor directions manually!<br /> | ||
<br /> | <br /> | ||
<br /> | |||
---- | |||
When the RPM Governor feature is installed on your unit and you're using a single-line receiver, push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']]. Otherwise pushing the button will end the Setup menu adjustment and you will get back into operation mode. | When the RPM Governor feature is installed on your unit and you're using a single-line receiver, push the button to save the configuration and to proceed to [[Manuals:MB_Plus:Setupmenu_N|Setup menu point '''N''']]. Otherwise pushing the button will end the Setup menu adjustment and you will get back into operation mode. | ||
---- | |||