Revision as of 14:09, 17 December 2013
Information about message (contribute ) This message has no documentation.
If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Servos for flybarless usage )
Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice.
Servo torque in kg/cm should be at least 2-3 times the heli weight (in kilogram). Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using special heli servos which are designed for maximum vibration resistance is a good choice. Translation Torque should be at least 2-3 times the heli weight. Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using a special heli servo which are specially made for maximum vibration resistance is a good choice. Torque should be at least 2-3 times the heli weight. Speed should be at least 0.1s/45° or even faster. In addition the servo should be very precise, have little backlash and a low deadband. And of course best would be if it is a digital servo and supports 200 Hz driving frequency. Also using a special heli servo which are specially made for maximum vibration resistance is a good choice.