Translations:Help:FAQ/54/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "===Selection in the menus with the rudder control stick does not work.=== Maybe there is not enough movement or any movement at all on the rudder channel. * Check servo throw..." |
(No difference)
|
Revision as of 14:07, 9 June 2015
Maybe there is not enough movement or any movement at all on the rudder channel.
- Check servo throw and dual rate setting for the rudder channel in the transmitter and increase the throw.
- Receiver type "Standard": Check that the connector for the rudder channel (orange wire) is inserted correctly in the receiver.
- Is the correct stick moved? Check stick mode of transmitter and have a look at the servo monitor. Is there any movement on the channel that you have connected the orange wire for rudder function to (Receiver type "Standard")?
- Serial-wire receiver: Was the rudder channel assigned for rudder function at receiver setup menu?