Translations:Frequently Asked Questions/36/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
Importing a new version from external source
 
FuzzyBot (talk | contribs)
m FuzzyBot moved page Translations:Help:FAQ/36/en to Translations:Frequently Asked Questions/36/en without leaving a redirect: Part of translatable page "Help:FAQ".
 
(No difference)

Latest revision as of 15:32, 17 December 2013

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Frequently Asked Questions)
===My servos are getting warm/hot, is this normal?===
Similar to a tail gyro a flybarless system is constantly working and correcting. So the servos are moving much more frequently than if ther are controlled manually. Additionaly to that the servos are usually driven with higher frequency to enable the system giving commands to the servos as often and quick as possible. And because of the abolition of mixing levers and the support of the auxiliary rotor plane the servos have to resist higher forces in flight.

My servos are getting warm/hot, is this normal?

Similar to a tail gyro a flybarless system is constantly working and correcting. So the servos are moving much more frequently than if ther are controlled manually. Additionaly to that the servos are usually driven with higher frequency to enable the system giving commands to the servos as often and quick as possible. And because of the abolition of mixing levers and the support of the auxiliary rotor plane the servos have to resist higher forces in flight.