Update request/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older edit
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{DISPLAYTITLE:Current firmware versions}}
__TOC__
__TOC__
<br />
<br />
Update files for MICROBEAST, Trajectory and AR7200BX will be created exclusively for your device and mailed to the given address! To request an update the serial number for the device is necessary. Please have a look [[serial number|here]], if you don't know where to find the serial number. The update files can be uploaded to the unit by using the update functionality of StudioX. Also you can get firmware updates directly from within StudioX 2.0 (see [[StudioX 2.0 for Early Adopter|here]]).


<br />
Updates for your BEASTX devices can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see [[StudioX_overview|here]]).
Updating MICROBEAST PLUS can be directly done from within [[StudioX 2.0 for Early Adopter|StudioX 2.0 only]].<br />
<br />


== MICROBEAST PLUS ==  
== MICROBEAST PLUS and MICROBEAST PLUS HD ==  


Current firmware versions available:<br />
Current firmware versions available:<br />
'''4.0.0'''
{{QUOTE|'''4.0.0'''<br />
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl. As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the additional features there is no functional difference to firmware version 3.2.0. So if you don't need the additional features there is no must to buy them.
offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl.
* The RPM Governor can be used for electric and glow helicopters. It has built in soft start and autorotation bail out function. The control it quite similar to electric speed controllers with governor function, so you simply set your throttle curves as switches for "motor off", "headspeed 1", "headspeed 2" and "autorotation bailout". Adjusting complex throttle curves is not necessary anymore and the helicopter will maintain the specified rotor head speed over the whole flight. Optional the nitro governor can be also used in classic style with throttle curves and a separate switch for governor/rpm control.
As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the
* AttitudeControl overs different modes of self leveling. These are "Bailout rescue mode", "3D-Mode" and "Flight trainer mode" with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to level position when you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight regardless of how the pilot moves the stick.<br />
additional features there is no functional difference to firmware version 3.2.0. Of course also in future you will get
<br />  
product updates for free and for all versions. So if you don't need the additional features there is no must to buy them.<br />
'''3.2.0'''
  * RPM Governor can be used for electric and nitro/gas helicopters. It has built in soft start and autorotation bail
* supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
    out function. The control it quite similar to electric speed controllers with governor function, so you simply set your
* added rudder servo sub trim feature
    throttle curves as switches for "motor off", "headspeed 1", "headspeed 2", "autorotation bailout". Optional the nitro
* changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
    governor can be also used in classic style with a separate switch for govenor/rpm control.<br />
* safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go through the complete menu otherwise nothing will change
  * AttitudeControl overs different modes of self leveling. These are Bailout rescue mode, 3D-Mode and Flighttrainer
<br />
    mode with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to
'''3.1.3'''
    level position if you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust
* Bugfix: receiver channel initialisation could cause unit to start without stick control}}<br />
    stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight
    regardless of how the pilot moves the stick.   


== AR7200BX and AR7300BX ==
Current firmware versions available:<br/>
{{QUOTE|'''4.0.14'''
* RPM Governor feature for nitro and gas engines<br />
<br />
<br />
'''3.2.0'''
'''3.1.0'''<br />
  * supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
Similar to MICROBEAST firmware 3.0.12, see above.}}<br />
  * added rudder servo sub trim feature
  * changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
  * safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go
    through the complete menu otherwise nothing will change
<br />
'''3.1.3'''
  * Bugfix: receiver channel initialisation could cause unit to start without stick control


<br />
== MICROBEAST ==
== MICROBEAST ==
Request Updates Files for the MICROBEAST [http://update.beastx.com here] or download them directly with StudioX 2.0 (see [[StudioX 2.0 for Early Adopter|here]])


Current firmware version available:<br />
Current firmware version available:<br/>
'''3.0.12'''
{{QUOTE|'''3.0.12'''
  * Supports Graupner HOTT SUMD serial line signal
* Supports Graupner HOTT SUMD serial line signal
  * Improved receiver channel initialization
* Improved receiver channel initialization
  * Improved tailgyro algorithm for normal (rate) mode
* Improved tail gyro algorithm for Normal-Rate mode}}<br />


<br />
== Trajectory ==
== Trajectory ==
Request Updates Files for the Trajectory [http://trajectory.beastx.com here] or download them directly with StudioX 2.0 (see [[StudioX 2.0 for Early Adopter|here]])
Current firmware version available:<br/>
<br /><br />
{{QUOTE|'''3.0.12'''<br />
Current firmware version available:<br />
Similar to MICROBEAST, see above.}}
'''3.0.12''' (similar to MICROBEAST)
 
<br />
== AR7200BX ==
Request Updates Files for the AR7200BX [http://ar7200bx.beastx.com here] or download them directly with StudioX 2.0 (see [[StudioX 2.0 for Early Adopter|here]])
<br /><br />
Current firmware versions available:<br />
'''4.0.14'''
  * RPM Governor feature for nitro and gas engines
'''3.1.0''' (similar to MICROBEAST firmware 3.0.12)

Latest revision as of 08:13, 12 January 2018

Warning: Display title "Current firmware versions" overrides earlier display title "Update request".


Updates for your BEASTX devices can be uploaded to the unit by using the update functionality of StudioX. You can get the necessary firmware files directly from within StudioX (see here).

MICROBEAST PLUS and MICROBEAST PLUS HD

Current firmware versions available:

4.0.0
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl. As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the additional features there is no functional difference to firmware version 3.2.0. So if you don't need the additional features there is no must to buy them.

  • The RPM Governor can be used for electric and glow helicopters. It has built in soft start and autorotation bail out function. The control it quite similar to electric speed controllers with governor function, so you simply set your throttle curves as switches for "motor off", "headspeed 1", "headspeed 2" and "autorotation bailout". Adjusting complex throttle curves is not necessary anymore and the helicopter will maintain the specified rotor head speed over the whole flight. Optional the nitro governor can be also used in classic style with throttle curves and a separate switch for governor/rpm control.
  • AttitudeControl overs different modes of self leveling. These are "Bailout rescue mode", "3D-Mode" and "Flight trainer mode" with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to level position when you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight regardless of how the pilot moves the stick.


3.2.0

  • supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
  • added rudder servo sub trim feature
  • changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
  • safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go through the complete menu otherwise nothing will change


3.1.3

  • Bugfix: receiver channel initialisation could cause unit to start without stick control


AR7200BX and AR7300BX

Current firmware versions available:

4.0.14

  • RPM Governor feature for nitro and gas engines


3.1.0
Similar to MICROBEAST firmware 3.0.12, see above.


MICROBEAST

Current firmware version available:

3.0.12

  • Supports Graupner HOTT SUMD serial line signal
  • Improved receiver channel initialization
  • Improved tail gyro algorithm for Normal-Rate mode


Trajectory

Current firmware version available:

3.0.12
Similar to MICROBEAST, see above.

Retrieved from "https://wiki.beastx.com/index.php?title=Update_request/en&oldid=14273"