Translations:Manuals:MB Plus:Governor usage/3/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==RPM Display==
==RPM Display==
Since Firmware Version 4.2.x there is an integrated rpm display that shows the height of preset rotor speed when in operation mode. This can be used to additionally check your transmitter setup over [[Manuals:MB_Plus:Governormenu_D|Governor menu point '''D''']], i.e. when the heli is standing on the workbench with motor disconnected or removed rotor blades (Caution: Be very careful and keep a safe distance when running the model on the work bench for testing purpose!). Using the electric governor function with soft start feature, also you will see the actually measured rotor speed as soon as the ramp up starts and the rotor speed gets higher than 600rpm.<br />
Since firmware Version 4.2.x there is an integrated rpm display that shows the height of preset rotor head speed when in operation mode. This can be used to additionally check your transmitter setup over [[Manuals:MB_Plus:Governormenu_D|Governor menu point '''D''']], i.e. when the heli is standing on the workbench with motor disconnected. Using the electric governor function with soft start feature, also you will see the actually measured rotor head speed as soon as the ramp up starts and the rotor speed gets higher than 600rpm.<br />
<br />
<b>Caution:</b> Remove all rotorblades, be very careful and keep a safe distance when running the model on the work bench for testing purpose!<br />
<br />
<br />
{| align="left" cellspacing="20"
{| align="left" cellspacing="20"
Line 11: Line 13:
|}
|}
<div style="clear:both;"></div>
<div style="clear:both;"></div>
When you see the rpm view, the Status LED will be <b>off</b>. After some time without any change, the display switches back to show the tail gyro status (Status LED <b style="color: blue;">blue</b> or <b style="color: purple;">purple</b>).<br />
When you see the rpm view, the Status LED will be <b>off</b>. A solid Menu LED will indicate the preset head speed, a flashing Menu LED will show the actually measured head speed. After some time without any change, the display switches back to show the tail gyro status (Status LED <b style="color: blue;">blue</b> or <b style="color: purple;">purple</b>).<br />
<br />
<br />

Latest revision as of 13:58, 26 July 2016

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MB Plus:Governor usage)
==RPM Display==
Since firmware Version 4.2.x there is an integrated rpm display that shows the height of preset rotor head speed when in operation mode. This can be used to additionally check your transmitter setup over [[Manuals:MB_Plus:Governormenu_D|Governor menu point '''D''']], i.e. when the heli is standing on the workbench with motor disconnected. Using the electric governor function with soft start feature, also you will see the actually measured rotor head speed as soon as the ramp up starts and the rotor speed gets higher than 600rpm.<br />
<br />
<b>Caution:</b> Remove all rotorblades, be very careful and keep a safe distance when running the model on the work bench for testing purpose!<br />
<br />
{| align="left" cellspacing="20"
|- style="text-align: center;"
|[[Image:MBPlus_rpmview_eGov.png|250px]]
|style="border-left:solid 40px white;"|[[Image:MBPlus_rpmview_nGov.png|250px]]
|- style="text-align: center;"
|RPM display for electric heli governor
|style="border-left:solid 40px white;"|RPM display for nitro heli governor
|}
<div style="clear:both;"></div>
When you see the rpm view, the Status LED will be <b>off</b>. A solid Menu LED will indicate the preset head speed, a flashing Menu LED will show the actually measured head speed. After some time without any change, the display switches back to show the tail gyro status (Status LED <b style="color: blue;">blue</b> or <b style="color: purple;">purple</b>).<br />
<br />

RPM Display

Since firmware Version 4.2.x there is an integrated rpm display that shows the height of preset rotor head speed when in operation mode. This can be used to additionally check your transmitter setup over Governor menu point D, i.e. when the heli is standing on the workbench with motor disconnected. Using the electric governor function with soft start feature, also you will see the actually measured rotor head speed as soon as the ramp up starts and the rotor speed gets higher than 600rpm.

Caution: Remove all rotorblades, be very careful and keep a safe distance when running the model on the work bench for testing purpose!

RPM display for electric heli governor RPM display for nitro heli governor

When you see the rpm view, the Status LED will be off. A solid Menu LED will indicate the preset head speed, a flashing Menu LED will show the actually measured head speed. After some time without any change, the display switches back to show the tail gyro status (Status LED blue or purple).

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MB_Plus:Governor_usage/3/en&oldid=10998"