{{WARNING_QUOTE|Firstly enable AttitudeControl when all initial settings in SETUP MENU and RECEIVER MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.}}
{{WARNING_QUOTE|Firstly enable AttitudeControl when all initial settings in SETUP MENU and FUNCTION MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.}}
<br />
<br />
Latest revision as of 12:06, 19 July 2018
Status-LED
AttitudeControl operation mode
off
AttitudeControl disabled
purple
Angular Mode
red flashing
Bail out rescue mode
red
Bail out rescue mode with pitch
blue flashing
3D - Mode
blue
3D - Mode with pitch
Firstly enable AttitudeControl when all initial settings in SETUP MENU and FUNCTION MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.
Firstly enable AttitudeControl when all initial settings in SETUP MENU and FUNCTION MENU have been performed. Otherwise the servos may drive to the mechanical full stop, start binding and may get damaged, e.g. when AttitudeControl gets activated when leaving the menu and the system starts to try moving the heli.
