BEASTX Updater Classic/en: Difference between revisions

(3 intermediate revisions by the same user not shown)

Line 6:

'''~~If not already done~~ make sure that the driver files for your USB2SYS interface have been installed ~~and~~ install the files if necessary.''' For further information see this page: [[USB2SYS/SPMA3030 driver installation]].

'''On Windows computers make sure that the driver files for your USB2SYS interface have been installed or install the files if necessary.''' For further information see this page: [[USB2SYS/SPMA3030 driver installation]].

Line 17:

If the COM-Port to which the USB2SYS-Interface has been assigned by windows is known, you can directly choose it from the list of available interfaces:

If the COM-Port to which the USB2SYS-Interface has been assigned by windows is known, you can directly choose it from the list of available interfaces. On macOS/Linux usually the port is called "cu.SLAB_USBtoUART" or "tty.SLAB_USBtoUART" (you can use either of them):

[[File:Step 5_1.png|200px|thumb|none]]

Line 59:

'''3. Select Update-File'''

If the device was successfully identified you can go on with selecting an Update-File ~~(if you don't have a firmware update file yet, have a look [[Update_request|here]]).~~

If the device was successfully identified you can go on with selecting an Update-File:

"Open File…" button opens a dialog where you can choose the Update-File.

Line 68:

Or you can just drag'n'drop an Update-File from the Explorer to the Main window of the BEASTXUpdater.

An Updates-File can only be loaded if it is free of damage, complete and has the mentioned "upd" ending.

An Updates-File can only be loaded if it is free of damage, complete and has the mentioned ".upd" ending.

Application-Version, Data-Version and Target-Hardware will be shown if the file was loaded successfully:

@@ Line 6: / Line 6: @@
 <br />
-'''If not already done make sure that the driver files for your USB2SYS interface have been installed and install the files if necessary.''' For further information see this page: [[USB2SYS/SPMA3030 driver installation]].<br />
+'''On Windows computers make sure that the driver files for your USB2SYS interface have been installed or install the files if necessary.''' For further information see this page: [[USB2SYS/SPMA3030 driver installation]].<br />
 <br />
@@ Line 17: / Line 17: @@
 <br />
-If the COM-Port to which the USB2SYS-Interface has been assigned by windows is known, you can directly choose it from the list of available interfaces:
+If the COM-Port to which the USB2SYS-Interface has been assigned by windows is known, you can directly choose it from the list of available interfaces. On macOS/Linux usually the port is called "cu.SLAB_USBtoUART" or "tty.SLAB_USBtoUART" (you can use either of them):
 [[File:Step 5_1.png|200px|thumb|none]]
@@ Line 59: / Line 59: @@
 '''3. Select Update-File'''
-If the device was successfully identified you can go on with selecting an Update-File (if you don't have a firmware update file yet, have a look [[Update_request|here]]).
+If the device was successfully identified you can go on with selecting an Update-File:
 "Open File…" button opens a dialog where you can choose the Update-File.
@@ Line 68: / Line 68: @@
 Or you can just drag'n'drop an Update-File from the Explorer to the Main window of the BEASTXUpdater.
-An Updates-File can only be loaded if it is free of damage, complete and has the mentioned "upd" ending.
+An Updates-File can only be loaded if it is free of damage, complete and has the mentioned ".upd" ending.
 Application-Version, Data-Version and Target-Hardware will be shown if the file was loaded successfully:

BEASTX Updater Classic/en: Difference between revisions

Navigation menu

Search