Translations:Manuals:BXFbl:Setupmenu E/8/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
FuzzyBot (talk | contribs)
Importing a new version from external source
 
FuzzyBot (talk | contribs)
Importing a new version from external source
 
Line 2: Line 2:
* When you move the rudder stick to full deflection, the Status LED on the BEASTX system should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. Repeat this for the other direction. Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.<br />
* When you move the rudder stick to full deflection, the Status LED on the BEASTX system should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. Repeat this for the other direction. Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.<br />
<br />
<br />
<div class="iosgallery">
<html>
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20037.PNG">
<div class="ios-gallery-container">
<div class="iostext">Stick moved into one direction, deflection not enough</div>
        <!-- Erstes Bild und Text -->
</div>
        <div class="ios-gallery-item">
<div class="iosgallery">
            <div class="ios-gallery-image">
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG">
                <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20037.PNG" alt="Screenshot">
<div class="iostext">Stick moved into one direction, maximum position reached</div>
            </div>
            <div class="ios-gallery-text">Stick moved into one direction, deflection not enough!</div>
        </div>
        <div class="ios-gallery-item">
            <div class="ios-gallery-image">
                <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG" alt="Screenshot">
            </div>
            <div class="ios-gallery-text">Stick moved into one direction, maximum position reached!</div>
        </div>
</div>
</div>
</html>
<br />
<br />
* Now check the rudder direction of the servo on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. When the servo is moving correctly, set the rudder direction of the BEASTX gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />
* Now check the rudder direction of the servo on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. When the servo is moving correctly, set the rudder direction of the BEASTX gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />
<br />
<br />
<div class="iosgallery">
<html>
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG">
<div class="ios-gallery-container">
<div class="iostext">Stick moved left, but label shows right</div>
        <!-- Erstes Bild und Text -->
</div>
        <div class="ios-gallery-item">
<div class="iosgallery">
            <div class="ios-gallery-image">
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20041.PNG">
                <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG" alt="Screenshot">
<div class="iostext">Stick moved left, label shows left</div>
            </div>
            <div class="ios-gallery-text">Stick moved left, but label shows right!</div>
        </div>
        <div class="ios-gallery-item">
            <div class="ios-gallery-image">
                <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20041.PNG" alt="Screenshot">
            </div>
            <div class="ios-gallery-text">Stick moved left, label shows left!</div>
        </div>
</div>
</div>
</html>
<br />
<br />
* Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />
* Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />
<br />
<br />
<div class="iosgallery">
<html>
<img class="ios" src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20040.PNG">
<div class="ios-gallery-container">
<div class="iostext"></div>
        <!-- Erstes Bild und Text -->
        <div class="ios-gallery-item">
            <div class="ios-gallery-image">
                <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20040.PNG" alt="Screenshot">
            </div>
            <div class="ios-gallery-text">Use + and - buttons to adjust endpoint.</div>
        </div>
</div>
</div>
</html>
<br />
<br />
<br />
<br />

Latest revision as of 09:45, 10 August 2024

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:BXFbl:Setupmenu E)
=Setup with StudioX app=
* When you move the rudder stick to full deflection, the Status LED on the BEASTX system should light solid and the label ''right'' or ''left'' should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case '''increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position''' and the label will disappear in the software. Repeat this for the other direction. Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.<br />
<br />
<html>
 <div class="ios-gallery-container">
       <!-- Erstes Bild und Text -->
       <div class="ios-gallery-item">
           <div class="ios-gallery-image">
               <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20037.PNG" alt="Screenshot">
           </div>
           <div class="ios-gallery-text">Stick moved into one direction, deflection not enough!</div>
       </div>
       <div class="ios-gallery-item">
           <div class="ios-gallery-image">
               <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG" alt="Screenshot">
           </div>
           <div class="ios-gallery-text">Stick moved into one direction, maximum position reached!</div>
       </div>
</div>
</html>
<br />
* Now check the rudder direction of the servo on the helicopter. '''If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter''' and reverse the rudder channel to set stick control direction correctly. When the servo is moving correctly, set the rudder direction of the BEASTX gyro: When you move the rudder stick/servo to the <span style="color: #4169E1;">'''right'''</span>, the Status LED must light up or flash in <span style="color: #4169E1;">'''blue'''</span> color. When you move the rudder stick to the <span style="color: #DC143C;">'''left'''</span>, the Status LED must light up or flash in <span style="color: #DC143C;">'''red'''</span> color. '''When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either ''normal'' or ''inverted'' in the software.'''<br />
<br />
<html>
 <div class="ios-gallery-container">
       <!-- Erstes Bild und Text -->
       <div class="ios-gallery-item">
           <div class="ios-gallery-image">
               <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20038.PNG" alt="Screenshot">
           </div>
           <div class="ios-gallery-text">Stick moved left, but label shows right!</div>
       </div>
       <div class="ios-gallery-item">
           <div class="ios-gallery-image">
               <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20041.PNG" alt="Screenshot">
           </div>
           <div class="ios-gallery-text">Stick moved left, label shows left!</div>
       </div>
</div>
</html>
<br />
* Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.<br />
<br />
<html>
 <div class="ios-gallery-container">
       <!-- Erstes Bild und Text -->
       <div class="ios-gallery-item">
           <div class="ios-gallery-image">
               <img src="https://wiki.beastx.com/images/studiox/freakware%202019-07-09%20040.PNG" alt="Screenshot">
           </div>
           <div class="ios-gallery-text">Use + and - buttons to adjust endpoint.</div>
       </div>
</div>
</html>
<br />
<br />

Setup with StudioX app

  • When you move the rudder stick to full deflection, the Status LED on the BEASTX system should light solid and the label right or left should change the color accordingly. If the stick is not moving far enough, you will see the message "Increase!" In this case increase the servo throw/endpoint of the rudder channel in the transmitter just as far so that the Status LED changes from flashing to solid when the rudder stick reaches the end position and the label will disappear in the software. Repeat this for the other direction. Note: Do not increase the endpoint too much in the transmitter. We need an exact match of full stick position and stick end position. So the Status LED should just change from flashing to solid when raching the end position.



  • Now check the rudder direction of the servo on the helicopter. If the stick is moving the servo into the wrong direction use the servo reverse function of your transmitter and reverse the rudder channel to set stick control direction correctly. When the servo is moving correctly, set the rudder direction of the BEASTX gyro: When you move the rudder stick/servo to the right, the Status LED must light up or flash in blue color. When you move the rudder stick to the left, the Status LED must light up or flash in red color. When the display is inverted (red = right and blue = left), reverse the display (internal control direction) by choosing either normal or inverted in the software.



  • Finally adjust the servo limit by changing the values in the two adjustment boxes for each direction. To do so, carefully use the rudder stick to move the servo to the endpoint (watch out to not jam the servo) and increase/decrease the endpoint as necessary.