Help:StudioX/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older editNewer edit →
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
Line 3: Line 3:


===StudioX does not recognize my device===
===StudioX does not recognize my device===
''I start the StudioX software and connect my MICROBEAST/AR7200BX to the computer but nothing happens.''
''I start the StudioX software and connect my BEASTX device to the computer but nothing happens.''
* On computers with Microsoft Windows operating system first of all make sure you did install the driver files for the USB2SYS interface. These files come with software package when downloading it, but they must be installed separately. Do not plugin the USB2SYS unless you did not install these driver files. Remove the interface if you already plugged it in before installing the files. For further information see the section about [[StudioX|StudioX Installation]].
* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and make sure that the device is powered in case it is not powered from the USB interface (this is only the case with the RX2SIM interface).
* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry). See the section about [[studiox microbeast plugin|Microbeast Plugin]] or [[studiox ar7200bx plugin|AR7200BX Plugin]] for further information.
* On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described [[USB2SYS/SPMA3030_driver_installation/en|here]].
* With the StudioX software bundle you also get the old style MICROBEAST updater. On Windows click your START icon and choose the BEASTX programm group. There you find the BEASTX Updater Classic. Disconnect your USB2SYS and choose "Autodetect..." button to start searching the USB2SYS interface. Now connect your USB2SYS and see if the serial port is found (if not, you probably did not install the driver files correctly as mentioned above or your device is damaged). Now if you know the serial port go back to StudioX and see if the port is mentioned in the PlugIn configuration (see above). Make sure you did not select or deselect the port in the configuration. Note there are two options that will include or exclude ports!<br />
* Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described [[StudioX_Microbeast_Plugin/en#Advanced_plugin_configuration|here]] for example.<br />
<br />
<br />
''I connect the USB2SYS to my MICROBEAST/AR7200BX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />
''I connect the USB2SYS/SPMA3030 inteface to my MICROBEAST / AR7xxxBX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.''<br />
When the LED lights up the connection wire is plugged in with wrong polarity! The light on the USB2SYS may only flash sporadically when data is transferred between computer and MICROBEAST unit but it mustn't light up continuously.<br />
<p>
When the blue LED lights up the connection wire is plugged in with wrong polarity! Usually the light on the interface flashes sporadically when data is transferred between computer and BEASTX device but it mustn't light up continuously.</p><br />
<br />
<br />


Revision as of 12:46, 8 March 2016


StudioX does not recognize my device

I start the StudioX software and connect my BEASTX device to the computer but nothing happens.

  • Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and make sure that the device is powered in case it is not powered from the USB interface (this is only the case with the RX2SIM interface).
  • On computers with Microsoft Windows operating system make sure the driver files for the USB2SYS / SPMA3030 / RX2SIM interface has been installed as described here.
  • Check the PlugIn configuration for your device within StudioX (in the menu bar click "Edit" and choose the "Plugins.." entry) as described here for example.


I connect the USB2SYS/SPMA3030 inteface to my MICROBEAST / AR7xxxBX and to the computer but nothing happens except the blue LED lights up on the USB2SYS.

When the blue LED lights up the connection wire is plugged in with wrong polarity! Usually the light on the interface flashes sporadically when data is transferred between computer and BEASTX device but it mustn't light up continuously.



How can I deregister a MICROBEAST PLUS / SPEKTRUM AR7210BX from my fw network account?

To deregister your device (i. e. in case you sold it to someone else) please send us an email and tell us the serial number of the device and your freakware Network account name. Removing the registration by the user is not possible at the moment.

Retrieved from "https://wiki.beastx.com/index.php?title=Help:StudioX/en&oldid=10481"