MicroSettings/de: Difference between revisions

Jump to navigation Jump to search
← Older editNewer edit →
Created page with "Ein paar kurze Hinweise zu den einzelnen Einstellpunkten:"
Created page with "* Bei Verwendung von RevoMIX soll der Heckrotor das Drehmoment des Hauptrotors kompensieren. Bei einem Hubschrauber mit rechts drehendem Hauptrotor muss daher der Heckrotor be..."
Line 12: Line 12:
Ein paar kurze Hinweise zu den einzelnen Einstellpunkten:
Ein paar kurze Hinweise zu den einzelnen Einstellpunkten:


* When using the RevoMIX the tail rotor must compensate load of the main rotor system. So on a helicopter with clockwise turning main rotor therefore if you enter pitch (both positive and negative!) the tail rotor must turn to the right. This also applies to cyclic movements of roll and pitch independently of the direction. Whenever torque is built up the tail rotor must compensate with anti torque. At 0° pitch the tail rotor makes the least deflection.
* Bei Verwendung von RevoMIX soll der Heckrotor das Drehmoment des Hauptrotors kompensieren. Bei einem Hubschrauber mit rechts drehendem Hauptrotor muss daher der Heckrotor bei einer Pitcheingabe (sowohl zyklisch als auch kollektiv, positiv sowie negativ) immer entgegen dem Drehmomment steuern, also Nase des Helis nach rechts, steuern. Bei 0° Pitch hat der Heckrotor am wenigsten Steuerauschlag, sobald Roll,Nick, Pitch gesteuert wird bewegt sich die Schiebehülse immer in dieselbe Richtung!


* Experience has shown that a ratio of 1:2 between cyclic and collective pitch is a good guide. For example 15 cyclic and 30 collective Pitch. Then slowly increase to the optimum values. This presupposes that the tail rotor (sensitivity and heading lock proportion) are were adjusted to the optimum extent before. The RevoMIX is only an aid to improve the performance of the tail gyro for example when the tail rotor system is slightly undersized but not to conceal a poor control at all (if without RevoMix when giving pitch the tail turns away desperately you should check the mechanics and tail gyro adjustment).
* Experience has shown that a ratio of 1:2 between cyclic and collective pitch is a good guide. For example 15 cyclic and 30 collective Pitch. Then slowly increase to the optimum values. This presupposes that the tail rotor (sensitivity and heading lock proportion) are were adjusted to the optimum extent before. The RevoMIX is only an aid to improve the performance of the tail gyro for example when the tail rotor system is slightly undersized but not to conceal a poor control at all (if without RevoMix when giving pitch the tail turns away desperately you should check the mechanics and tail gyro adjustment).
Retrieved from "https://wiki.beastx.com/index.php?title=MicroSettings/de"