Translations:Manuals:MBPlusFblV5:Setupmenu M/1/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older editNewer edit →
No edit summary
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
Line 1: Line 1:
{{DISPLAYTITLE:SETUP MENU M - Cyclic directions|noerror}}
{{DISPLAYTITLE:SETUP MENU M - Cyclic directions|noerror}}
{{TOC_MBPlusV5}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Setupmenu_L/en|Manuals:MBPlusFblV5:Governor/en}}
__TOC__
__TOC__
<br />
<br />

Revision as of 07:07, 12 January 2018

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Manuals:MBPlusFblV5:Setupmenu M)
{{DISPLAYTITLE:SETUP MENU M - Cyclic directions|noerror}}
{{TOC_MBPlusV5|Manuals:MBPlusFblV5:Setupmenu_L/en|Manuals:MBPlusFblV5:Governor/en|SETUPMENU}}
__TOC__
<br />

MICROBEAST PLUS V5

1. Introduction

2. Box content and accessories

3. Hardware installation

4. Radio system

5. Receiver Menu

6. Basic setup
Device orientation
Swashplate servos
Rudder pulse width
Rudder frequency
Rudder control
Swash mixing
Servo trim
Servo directions
Cyclic throw
Collective pitch
Servo limit
Cyclic directions
7. Headspeed Governor
Activating the governor
Sensor test mode
Throttle low position
Throttle high position
Transmitter setup
Signal divider
Main gear ratio
8. Additional settings
Trimming
Control style
Special parameters
Gains

9. AttitudeControl (Self leveling)

10. Bank Switching

11. Factory reset

12. Version information

13. Firmware update

← →


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Manuals:MBPlusFblV5:Setupmenu_M/1/en&oldid=14177"