Help:StudioX: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Marked this version for translation |
Shornstein (talk | contribs) No edit summary |
||
| Line 26: | Line 26: | ||
<br /> | <br /> | ||
==StudioX does not recognize my device== <!--T:1--> | ==StudioX (Version 2.x.x) does not recognize my device== <!--T:1--> | ||
''I start the StudioX software and connect my BEASTX device to the computer but nothing happens.'' | ''I start the StudioX software and connect my BEASTX device to the computer but nothing happens.'' | ||
* Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and '''make sure that the device is powered from a receiver battery or BEC''' (only when using the RX2SIM interface the BEASTX device can be powered from the USB port!). | * Make sure the wiring is connected correctly. The servo wire coming from the USB interface goes into SYS port on your MICROBEAST / AR7xxxBX device. Watch out for correct polarity and '''make sure that the device is powered from a receiver battery or BEC''' (only when using the RX2SIM interface the BEASTX device can be powered from the USB port!). | ||
| Line 46: | Line 46: | ||
==StudioXm does not find the BLE2SYS bluetooth interface when refreshing the interface list== <!--T:10--> | ==StudioXm does not find the BLE2SYS bluetooth interface when refreshing the interface list== <!--T:10--> | ||
* Make sure bluetooth is switched on at your smartphone/tablet | * Make sure bluetooth is switched on at your smartphone/tablet. | ||
* BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this special bluetooth protocol | * Do NOT connect to the BLE2SYS device over the smartphone/tablet bluetooth menu, StudioXm establish connection by itself! | ||
* BLE2SYS uses bluetooth smart (bluetooth LE), make sure your mobile device supports this special bluetooth protocol. | |||
* Make sure the LED on the BLE2SYS flashes in intervals of 2 seconds. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.<br /> | * Make sure the LED on the BLE2SYS flashes in intervals of 2 seconds. By default the interface deactivates after 30 seconds whe there is no connection. In this case the LED is off. You have to cylce power in order to reactivate the device.<br /> | ||
<br /> | <br /> | ||