Translations:Manuals:MBPlusFblV52:Hardware Installation/2/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
=Attaching your Microbeast PLUS to the helicopter= | =Attaching your Microbeast PLUS to the helicopter= | ||
Attach the | Attach the MICROBEAST PLUS gyro by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter. | ||
<p> | <p> | ||
There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached '''flat or upright''' on the helicopter | There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached '''flat or upright''' on the helicopter. The '''servo connector pins must always point towards the front or rear''' of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction:</p> | ||
<div class="noprint"> | <div class="noprint"> | ||
{| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;" | {| cellspacing="20" style="text-align: center; width: 300px; font-size: 70%;" | ||
| Line 51: | Line 51: | ||
</div> | </div> | ||
<br /> | <br /> | ||
{{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft! | {{QUOTE|[[File:Warning.png|18px|sub]] '''Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter!''' Especially make sure that the mounting platform is perpendicular to the main shaft!<br /> | ||
<br /> | |||
It is '''not important''' that the unit is directly placed above the rotation axis (which is nearly impossible). Also it doesn't matter whether the system is placed in parallel to the ground or not.}}<br /> | |||
<br /> | <br /> | ||
{{NL}} | {{NL}} | ||
Latest revision as of 12:22, 17 March 2023
Attaching your Microbeast PLUS to the helicopter
Attach the MICROBEAST PLUS gyro by using one of the provided 3M® gyropads at a preferably low vibrating position on your helicopter such as the gyro platform or receiver platform. You may need to choose another type of mounting pad depending on the vibration pattern of your helicopter.
There are eight possible mounting orientations: The MICROBEAST PLUS unit either can be attached flat or upright on the helicopter. The servo connector pins must always point towards the front or rear of the helicopter. The small white sensor pinboard on the side must always be inline with flight direction:
|
| ||
 flat, cover on top, servo connectors showing to front |
 flat, cover showing to bottom, servo connectors showing to front |
 upright, button on top, servo connectors showing to front |
 upright, button on bottom, servo connectors showing to front |
 flat, cover on top, servo connectors showing to rear |
 flat, cover showing to bottom, servo connectors showing to rear |
 upright, button on bottom, servo connectors showing to rear |
 upright, button on top, servo connectors showing to rear |
|
Pay attention that the edges of the Microbeast PLUS unit are all parallel with the corresponding rotational axes of the helicopter! Especially make sure that the mounting platform is perpendicular to the main shaft!
It is not important that the unit is directly placed above the rotation axis (which is nearly impossible). Also it doesn't matter whether the system is placed in parallel to the ground or not.
