Translations:Help:FAQ:General/9/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older editNewer edit →
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
Line 2: Line 2:
<br />
<br />
{{WARNING_QUOTE|When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the instruction manual for Version 5.x and do the basic setup again.}}<br />
{{WARNING_QUOTE|When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the instruction manual for Version 5.x and do the basic setup again.}}<br />
'''5.7.0''' (not yet released)<br />
:''Telemetry (optional/PROEDITION)''
:* added telemetry data processing for YGE ESC(YGE TEXY protocol)
:* added telemetry data processing for Spektrum AVIAN Smart ESC (must be connected at SYS port)
:* added telemetry data input for Graupner HOTT receivers (telemetry line must be connected at SYS port)
:* capacity correction value now can be used in combination with any telemetry ESC if needed<br />
<br />
'''5.5.2'''<br />
'''5.5.2'''<br />
:''Telemetry (optional/PROEDITION)''
:''Telemetry (optional/PROEDITION)''

Revision as of 09:58, 13 February 2023

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Help:FAQ:General)
==MICROBEAST PLUS==
<br />
'''5.9.4'''<br />
:* support for JETIBOX menu on JETI radios with EXBUS data protocol
:* support for Spektrum forward programming screen on Spektrum radios with SRXL2 data protocol
:* added CRSF data protocol for OPENTX/EDGETX radio with TBS or ELRS receivers, i.e. Radiomaster T16s
:''Telemetry/PROEDITION''
:* CRSF telemetry connection at [SYS] port
:* FRSky S.Port (inverted) telemetry connection at [SYS] port
<br />

MICROBEAST PLUS


When updating from firmware 4.x.x or lower to Version 5.x.x you will loose all your settings. Please carefully read the instruction manual for Version 5.x and do the basic setup again.


5.7.0 (not yet released)

Telemetry (optional/PROEDITION)
  • added telemetry data processing for YGE ESC(YGE TEXY protocol)
  • added telemetry data processing for Spektrum AVIAN Smart ESC (must be connected at SYS port)
  • added telemetry data input for Graupner HOTT receivers (telemetry line must be connected at SYS port)
  • capacity correction value now can be used in combination with any telemetry ESC if needed


5.5.2

Telemetry (optional/PROEDITION)
  • added telemetry data processing for Scorpion Tribunus II 14-200 ESC


5.5.1

Telemetry (optional/PROEDITION)
  • added telemetry data processing for Hobbywing Platinum V5 ESC


5.4.0

Telemetry (optional/PROEDITION)
  • added SRXL2 and EXBUS telemetry output
  • added telemetry data processing for Hobbywing Platinum V4, Kontronik Jive/Kosmik and Scorpion Tribunus ESCs


5.2.4

AttitudeControl rescue (optional/PROEDITION)
  • added option for automatic rescue deactivation when helicopter reaches level position


Setup
  • menu point ordering has changed in SETUP MENU (H = servo reverse, I = stick directions, J = servo trim, K = cyclic throw, L = collective, M = swash limit)!
  • added swashplate trim option to the trim menu at SETUP MENU Point J


Receivers
  • added SRXL2 receiver protocol, can be connected at white pin board on the side
  • added option to connect iBus remote receiver (comes with ALIGN T-Rex 300X)
  • made ready for telemtry support (coming soon..)


StudioX
  • added help buttons to display help text only when needed
  • added screen stacks for adjustment buttons for clearer display layout on smartphones


Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Help:FAQ:General/9/en&oldid=20237"