Translations:Manuals:BXFbl:Setupmenu overview/17/en: Difference between revisions
Jump to navigation
Jump to search
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
= J - Servo trim = | = J - Servo trim = | ||
Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should form a 90 degrees angle to the linkages. The swashplate must be perfectly level. Repeat this for all servos.<br /> | |||
<br /> | <br /> | ||
Note: When the Status LED is off, all servos are in their true center position (1520µs pulse width).<br /> | |||
<br /> | <br /> | ||
Latest revision as of 10:57, 19 April 2024
J - Servo trim
Tap rudder stick to select one servo after another. If necessary, tap/hold the roll/aileron stick to adjust the servo center position. All servos should form a 90 degrees angle to the linkages. The swashplate must be perfectly level. Repeat this for all servos.
Note: When the Status LED is off, all servos are in their true center position (1520µs pulse width).