BEASTX Updater Classic/en: Difference between revisions
Jump to navigation
Jump to search
Updating to match new version of source page |
Importing a new version from external source |
||
| Line 25: | Line 25: | ||
IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!). | IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!). | ||
The cable from the interface goes into the Microbeast's [SYS] port. Watch out for correct polarity on both devices. | The cable from the interface goes into the Microbeast's [SYS] port. Watch out for correct polarity on both devices.<br /> | ||
<br /> | |||
If the COM-Port, to which the USB2SYS-Interface has been assigned by windows, is known you can directly choose it from the list of available interfaces: | If the COM-Port, to which the USB2SYS-Interface has been assigned by windows, is known you can directly choose it from the list of available interfaces: | ||