Translations:BEASTX Updater Classic/49/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older editNewer edit →
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
Line 1: Line 1:
IMPORTANT: The MICROBEAST will not be powered from the USB2SYS-Interface, so the MICROBEAST must be supplied with power from a different source BEFORE you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
The MICROBEAST will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).

Revision as of 16:37, 17 December 2014

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (BEASTX Updater Classic)
 The BEASTX device will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
 before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
The MICROBEAST will not be powered from the USB2SYS-Interface! So the unit must be supplied with power from a different source
before(!) you connect it to the PC, e.g. simply switch on tx and rx as you would go flying (on electric helis take care of the motor!).
Retrieved from "https://wiki.beastx.com/index.php?title=Translations:BEASTX_Updater_Classic/49/en&oldid=2874"