Translations:Update request/7/en: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older editNewer edit →
FuzzyBot (talk | contribs)
7,906 edits
Importing a new version from external source
No edit summary
Line 5: Line 5:
  As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the
  As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the
  additional features there is no functional difference to firmware version 3.2.0. Of course also in future you will get
  additional features there is no functional difference to firmware version 3.2.0. Of course also in future you will get
  product updates for free and for all versions. So if you don't need the additional features there is no must to buy them.<br/>
  product updates for free and for all versions. So if you don't need the additional features there is no must to buy them.<br />
   * RPM Governor can be used for electric and nitro/gas helicopters. It has built in soft start and autorotation bail
   * RPM Governor can be used for electric and nitro/gas helicopters. It has built in soft start and autorotation bail
     out function. The control it quite similar to electric speed controllers with governor function, so you simply set your
     out function. The control it quite similar to electric speed controllers with governor function, so you simply set your

Revision as of 11:13, 10 February 2015

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Update request)
Current firmware versions available:<br />
{{QUOTE|'''4.0.0'''<br />
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl. As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the additional features there is no functional difference to firmware version 3.2.0. So if you don't need the additional features there is no must to buy them.
* The RPM Governor can be used for electric and glow helicopters. It has built in soft start and autorotation bail out function. The control it quite similar to electric speed controllers with governor function, so you simply set your throttle curves as switches for "motor off", "headspeed 1", "headspeed 2" and "autorotation bailout". Adjusting complex throttle curves is not necessary anymore and the helicopter will maintain the specified rotor head speed over the whole flight. Optional the nitro governor can be also used in classic style with throttle curves and a separate switch for governor/rpm control.
* AttitudeControl overs different modes of self leveling. These are "Bailout rescue mode", "3D-Mode" and "Flight trainer mode" with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to level position when you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight regardless of how the pilot moves the stick.<br />
<br />  
'''3.2.0'''
* supports new SRXL receiver types: Spektrum SRXL and Multiplex SRXL V2
* added rudder servo sub trim feature
* changed Status LED colors at Setup menu point M (Sensor directions) to be similar to MICROBEAST version 3.0.12
* safety feature for Receiver setup menu: to change/setup receiver type and channel assignment you must go through the complete menu otherwise nothing will change
<br />
'''3.1.3'''
* Bugfix: receiver channel initialisation could cause unit to start without stick control}}<br />

Current firmware versions available:

4.0.0
This version is an upgrade version that brings new features to your MICROBEAST PLUS device. At the moment there are
offered two versions: one with RPM Governor only and the full featured Pro-Edition with RPM-Governor and AttitudeControl.
As these versions enhance the functionality of MICROBEAST PLUS, we will charge some fee for these. Despite of the
additional features there is no functional difference to firmware version 3.2.0. Of course also in future you will get
product updates for free and for all versions. So if you don't need the additional features there is no must to buy them.

 * RPM Governor can be used for electric and nitro/gas helicopters. It has built in soft start and autorotation bail
   out function. The control it quite similar to electric speed controllers with governor function, so you simply set your
   throttle curves as switches for "motor off", "headspeed 1", "headspeed 2", "autorotation bailout". Optional the nitro
   governor can be also used in classic style with a separate switch for govenor/rpm control.

 * AttitudeControl overs different modes of self leveling. These are Bailout rescue mode, 3D-Mode and Flighttrainer
   mode with angular limitation. Basically when you activate the AttitudeControl it will turn your helicopter back to
   level position if you release the sticks. Some modes additionaly apply collective pitch input and lock your thrust
   stick in the ground direction. So the unit will turn your helicopter and keep it leveled in hovering flight
   regardless of how the pilot moves the stick.
Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Update_request/7/en&oldid=3684"