Help:FAQ/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) No edit summary |
||
Line 103: | Line 103: | ||
We are often asked which percentages of expo or dual rate corresponds to the different presets. As manufacturers calculate expo curves different, we can't tell you what our preset curves correspond to which TXs expo values as we use our own expo calculation and there is no data available for comparing. We did outfly these values and programmed them in the source code so we can't tell what these are in Futaba or JR percentages. If you want to use a specific preset as your starting point we suggest to connect your MICROBEAST to the StudioX software. Here you can see the different values for each control behavior preset and you can create a custom preset for which you may use the given values and adjust them until they perfectly fit your flying style. | We are often asked which percentages of expo or dual rate corresponds to the different presets. As manufacturers calculate expo curves different, we can't tell you what our preset curves correspond to which TXs expo values as we use our own expo calculation and there is no data available for comparing. We did outfly these values and programmed them in the source code so we can't tell what these are in Futaba or JR percentages. If you want to use a specific preset as your starting point we suggest to connect your MICROBEAST to the StudioX software. Here you can see the different values for each control behavior preset and you can create a custom preset for which you may use the given values and adjust them until they perfectly fit your flying style. | ||
'''Hinweis zu MICROBEAST/AR7200BX/AR7300BX:''' | |||
Wurde im Parametermenü bei Punkt B die Einstellung „Sender“ gewählt (Status LED blau) so kann man genau sehen, ab welchem Steuerknüppelausschlag die maximale vom Heckkreisel kontrollierbare Drehrate erreicht wird: ist der HeadingLock-Modus aktiv, so wird ab einem bestimmten Heckknüppelausschlag die Status LED zu blinken anfangen. Man befindet sich dann an der Drehratengrenze. Vergrößern Sie den Servoweg/Knüppelausschlag im Sender nun weiter, so wird die Status LED ab einem bestimmten Punkt abschalten. Ab hier wird die Heckdrehrate nicht mehr auf die maximal physikalisch vom Gyro Sensor mögliche Drehrate begrenzt, sondern man gelangt in den frei drehenden Bereich, der nicht | |||
mehr vom Gyro kontrolliert werden kann. Durch weitere Vergrößerung des Servowegs können Sie die maximale Drehrate im frei drehenden Bereich beliebig erhöhen, soweit die Mechanik des Helikopters dies zulässt! Diese Funktion sollte nur kurzfristig für spezielle Show-Flugmanöver genutzt werden, z. B. | |||
indem kurz per „DualRate“ darauf umgeschaltet wird. Im normalen Flugbetrieb ist es sehr schwer zu kontrollieren, ob man sich im geregelten oder ungeregelten Bereich befindet und es besteht die Gefahr, dass man aufgrund der extrem hohen Drehrate die Orientierung verliert! | |||
<br /> | <br /> |