RC Power supply/de: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) Created page with "Aus diesem Grund sollten mindestens 2 bis 3 Servostecker von der Stromquelle kommend parallel am Microbeast angesteckt werden, z.B. an den freien Ein-/Ausgängen, oder auch zu..." |
Shornstein (talk | contribs) Created page with "==Externe Stromversorgung der Servos==" |
||
| Line 11: | Line 11: | ||
== | ==Externe Stromversorgung der Servos== | ||
On the other hand it is a very good practice, when using such high power servos as mentiond above, to decouple the servo power completely from receiver and microbeast and use a regulator as power supply or some kind of power bus/power distribution system (which simply may be connecting the power wires from the servos directly to the battery). So voltage loss and internal resistance are reduced to a minimum (the higher the current and the higher resistance, the more voltage you will loose!). | On the other hand it is a very good practice, when using such high power servos as mentiond above, to decouple the servo power completely from receiver and microbeast and use a regulator as power supply or some kind of power bus/power distribution system (which simply may be connecting the power wires from the servos directly to the battery). So voltage loss and internal resistance are reduced to a minimum (the higher the current and the higher resistance, the more voltage you will loose!). | ||