RC Power supply/de: Difference between revisions

Revision as of 10:34, 14 April 2015 view source Shornstein (talk \| contribs) Bureaucrats, Interface administrators, Suppressors, Administrators, translate-proofr 17,178 edits Created page with "==Externe Stromversorgung der Servos==" ← Older edit		Revision as of 10:37, 14 April 2015 view source Shornstein (talk \| contribs) Bureaucrats, Interface administrators, Suppressors, Administrators, translate-proofr 17,178 edits Created page with "Sollten Sie obige Empfehlungen nicht umsetzen können oder falls Sie extrem stromhungrige Servos verwenden, dann ist der beste Weg, die Servos direkt vom Empfängerstromkreis ..." Newer edit →
Line 13:		Line 13:
	==Externe Stromversorgung der Servos==		==Externe Stromversorgung der Servos==

	~~On the other hand it is a very good practice~~, ~~when using such high power servos as mentiond above~~, to decouple the servo power completely from receiver and microbeast and use a regulator as power supply or some kind of power bus/power distribution system (which simply may be connecting the power wires from the servos directly to the battery). So voltage loss and internal resistance are reduced to a minimum (the higher the current and the higher resistance, the more voltage you will loose!).		Sollten Sie obige Empfehlungen nicht umsetzen können oder falls Sie extrem stromhungrige Servos verwenden, dann ist der beste Weg, die Servos direkt vom Empfängerstromkreis abzutrennen und an ein separetes Versorgungssystem oder eine Akkuweiche anzustecken.

Navigation menu