Manuals:MB Plus:Receiver Installation: Difference between revisions
Jump to navigation
Jump to search
Shornstein (talk | contribs) No edit summary |
Shornstein (talk | contribs) No edit summary |
||
Line 7: | Line 7: | ||
===Standard receivers=== <!--T:2--> | ===Standard receivers=== <!--T:2--> | ||
A standard receiver is a receiver that is connected to MICROBEAST PLUS by using | A standard receiver is a receiver that is connected to MICROBEAST PLUS by using the single servo outputs of the receiver and connect them to the five control channels of MICROBEAST PLUS. The channel which determines the controlled function simply is selected by inserting each plug to the correct output at the receiver. | ||
<gallery widths=300px> | <gallery widths=300px> | ||
Image:Standard_RX.png | Image:Standard_RX.png | ||
Line 17: | Line 17: | ||
===Single-Line receivers=== <!--T:3--> | ===Single-Line receivers=== <!--T:3--> | ||
With a single-line receiver all channels (control functions) are transmitted by one single connection line to MICROBEAST PLUS. This is done by packing all channel output data to a digital data paket or by chaining the servo signals to one output port. Because of this, it is not possible here to assign functions by inserting the appropriate plugs in the receiver. Instead you have to assign the function ordering by software in the MICROBEAST PLUS receiver setup menu, so that the unit "knows" what control function each incoming channel is used for. | |||
<!--T:4--> | <!--T:4--> |