Translations:Manuals:MB Plus:Receiver setup menu B/1/en: Difference between revisions
Jump to navigation
Jump to search
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
{{TOC_MBPlus}} | {{TOC_MBPlus}} | ||
{{DISPLAYTITLE:Receiver setup menu point B and following|noerror}} | {{DISPLAYTITLE:Receiver setup menu point B and following|noerror}} | ||
If not a standard receiver but a single-line receiver was selected at [[Manuals:MB_Plus:Receiver_setup_menu_A|menu point '''A''']], it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.< | <p> | ||
If not a standard receiver but a single-line receiver was selected at [[Manuals:MB_Plus:Receiver_setup_menu_A|menu point '''A''']], it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.</p> | |||
Latest revision as of 08:47, 2 July 2015
If not a standard receiver but a single-line receiver was selected at menu point A, it must be established which control function is controlled by what channel. This is necessary because all the control functions are transmitted via one single line and virtually every manufacturer uses his own order in the arrangement of channels to control functions. There is no possibility of plugging the cables in each individual channel matching, like it is with a standard receiver.