Translations:Frequently Asked Questions/38/de: Difference between revisions

From BEASTX Wiki
Jump to navigation Jump to search
← Older edit
No edit summary
FuzzyBot (talk | contribs)
7,906 edits
m FuzzyBot moved page Translations:Help:FAQ/38/de to Translations:Frequently Asked Questions/38/de without leaving a redirect: Part of translatable page "Help:FAQ".
 
(No difference)

Latest revision as of 14:57, 17 December 2013

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Frequently Asked Questions)
===Servos react somehow "notchy" at high frame rate. Is MICROBEAST damaging my servos?===
If the servos are approved by the manufacturer to this driving frequency, this is a normal effect. The servos get new positioning signals four times faster than if they are connected to a conventional remote control receiver. Especially servos with brushless motors run very hard and direct which causes slightly jerky movements in modes with high servo framerate. This is totally harmless to the servos and you will not notice in flight operation.

Die Servos laufen irgendwie "hakelig" bei einer Framerate von 200Hz.

Wenn die Servos vom Hersteller für diese Ansteuerfrequenz freigegeben sind, ist dies ein normaler Effekt. Die Servos bekommen 4x schneller ein neues Stellsignal als wenn sie an einem herkömmlichen Fernsteuerempfänger angeschlossen werden. Insbesondere Servos mit bürstenlosen Motoren laufen von Haus aus sehr hart und direkt an und so kommt es im 200Hz Betrieb zu diesen leicht ruckartigen Bewegungen, die jedoch völlig unschädlich und im Flugbetrieb nicht zu bemerken sind.

Retrieved from "https://wiki.beastx.com/index.php?title=Translations:Frequently_Asked_Questions/38/de&oldid=839"